The use of valves in industries is very common; every industry requires to have various valves for the supply of gases or liquids. Therefore, industrial valves were created to be used specifically for this purpose. The definition of industrial valves could be precisely this that these are devices that open, close, or partially block the path for the flow of liquids and gases in various industrial systems. Some valves can only perform the function of opening and closing, while others can only partially hinder the flow of liquids or gases to control the supply volume. However, such valves are also present that can perform both functions; they can open and close and can also control the flow of liquids or gases by partially blocking their path. Perhaps according to demand, certain valves are used in combination in industrial systems. If you are looking for the correct type of valve for your industry, keep reading as we have covered them all in this article.
Types Of Industrial Valves:
- Ball Valve:
The ball valve is like the shape of a ball that is hollow from
inside and has a ball-shaped disc to start or stop the flow of liquids or
gases. It has a quarter-turn rotation, which makes it one of the quickest
industrial valves. Get your ball valve from some China ball valve manufacturer for cheaper prices without compromising quality. The
advantages of using this valve are that its ability to shut off and on is very
quick and great. Negligible leakage in comparison to other valves. Its pressure
drop is very minimal and is very low maintenance.
- Butterfly Valve:
The butterfly valve is very compact and unique in its structure; it
has a flat but slightly concave disc attached from the center that rotates to
start, stop or control the flow of liquids or gases. It also has a quarter-turn
rotation making it the quickest industrial valve. The throttle service of this
valve is incredible. The advantages of using this valve in your industry are
that it is very easy to install, has very low maintenance, has minimal pressure
drop, and is very lightweight due to its compact but strong design.
- Gate Valve:
The gate valve has a gate shape or a wedge shape disc that is shut
open and close to start and stop the flow of liquids or gases. The movement of
this valve is linear, with no rotations involved. Although this valve is just a
shut-off and on valve but can also be used for controlling the flow but
shutting the disc halfway. When used for controlling the flow of liquids or
gases, its throttle service is good for a simple shut-off and on the valve. The
advantage of using this valve is that it can be used for bi-directional
flow.
- Plug Valve:
The plug valve has a disc that can be rotated quarter turn for the
start, stop and even throttle service. Its shut-off and on the mechanism are the
same as that of a ball valve. It has fast shut-off and on ability and has a
low-pressure drop. It creates a very tight seal when it shuts off.
Comments
Post a Comment